-
Sound and vibration dampening bumper, soft durometer
-
One of the quietest bumpers on the market today
-
Physical design softens sound by trapping sound within bumper
-
Synthetic rubber adhesive works on most surfaces
-
UL Recognized
-
Easy 'peel-off' application
-
Non staining, non marring, crack resistant & resilient
-
Contains no cheap plasticizers, oils, or filllers
-
Material: Polyurethane
-
Adhesive: Aggressive synthetic rubber
-
Durometer: Shore A: 50-55
|
Technical Info. located at bottom of page
JumpWS-58SD Quiet Close Sound Deadening Soft Durometer Cabinet Bumpers
as low as 3.4¢ per pc.
"Quiet Close" Soft Cabinet Bumpers - Every sound deadening feature that could be though of was squeezed into this cabinet bumper. Designed specifically for use where vibration and sound need to be kept to a minimum. Available from 40 to 40,000 bumpers.
Cross Reference: SJ5383, SJ 5383, 4066-00, BS-58
Available in: Clear
| WS-58SDCL-CASE |
Case of 5,000 Clear Pieces/Units |
$170.81
|
(3.4¢) |
| WS-58SDCL-BOX1 |
Box of 1,000 Clear Pieces/Units |
$54.00
|
(5.4¢) |
| WS-58SDCL-P200 |
Pad of 200 Clear Pieces/Units |
$17.63
|
|
| WS-58SDCL-P40 |
Pad of 40 Clear Pieces/Units |
$5.29
|
|
| WS-58SDCL-P20 |
Pad of 20 Clear Pieces/Units |
$3.53
|
|
|
Technical Information
METRICS
| Diameter (Width) |
1/2" |
12.7 mm |
| Height (Projection) |
13/64" |
5.1 mm |
Full Case Layout
| pcs per full case |
5000 |
| pcs per pad |
200 |
| pads per case |
25 |
| pad piece layout |
20 across x 10 down |
|
|
Polyurethane Specifications
| Spec Name |
Value |
| Tensile Strength, psi
| 750psi
|
| Elongation,%
| 607%
|
| Tear Strength, pli
| 127 pli
|
| Hardness, Shore A
| 50-55 Shore A
|
| Bashore Rebound, %
| 35%
|
| Abrasion Resistance g/1K cycles Tabor
| 0.010
|
| QUV (500 hours)
| DNA
|
| UL 94
| HBF
|
Adhesive Specifications
| Spec Name |
Value |
| Static Shear Test
| 300+ hours
|
| Quick Tack - Stainless Steel
| 77 oz/in2
|
| Peel Adhesion
| 64 oz/in
|
| Substrate: Thickness
| 2 mils
|
| Substrate: Weight
| 10,000 in2/lb
|
| Substrate: Tensil Strength
| 28,000 psi MD
|
| Liner: Thickness
| 6.2 mils
|
| Temperature: Application
| 65 deg F - 150 deg F
|
| Temperature: End Use
| 0 deg F - 180 deg F
|
| Substrate Elongation
| 120% MD
|
| Shelf Life
| 24 months
|
| Storage
| 73.4 deg F and 55% rel humidity
|
| Liner: Basis Weight
| 92.0 lb
|
|
Back to Top
Disclaimer: Although we try our best to provide reliable information. Due to the many applications of our products, we recommend performing suitability tests for your particular application. Do not solely use this information to determine the usability of these products for your application. No person is authorized to assume any liability or obligation for the suitability of this product for a particular application.
Warning: Choking Hazard. Bumpers are not recommended where toddlers or infants are present.
